Jquery highlight search text in div

11kV, 630A to 1250A, 26.3kA Indoor Vacuum Circuit Breaker Panel

Indoor VCB Panel:

Product overview
The legendary Indoor Vertical Isolation VCB is a preferred product in various Utilities & Indian Railways. The vertical isolation & horizontal draw-out truck ensures more ground space & provides higher degree of compactness than horizontal isolation trucks. The product comes with high rigidity & best in class control solutions.
Technical Details
  • Model No : 11KV: MV V12 I, 33kV : MV V36 I.
  • Rated Voltage & Rated Current :12kV & 36kV, 630A up to 2000A.
  • Frequency : 50Hz.
  • Short Time Withstand Current And Duration: 26.3kA/3Sec.
  • Insulation Level: 11kV : 28kV / 75kV Peak,33kV : 70kV / 170kV Peak.
  • Closing / Tripping Coil Voltage: 24VDC to 220VDC.
  • Spring Charge Mechanism: 230VAC.
  • Breaker Standard: IEC 62271 – 100, IS13318.
  • Degree of Protection: IP4X & 5X.
  • Outdoor VCB Panel

    Product overview
    The KIOSK is specially designed for unmanned substations in the Outdoor distribution network. It is a standalone vacuum switchgear system with built in self-driven independent control supply for self-tripping & closing of CB. The product is well equipped for metering, control, protection & SCADA compatibility.
    The product is available in two basic designs
  • Roof bushing type with incoming & outgoing through roof bushings (Rated Voltage: 12 & 36 kV).
  • Line up type with incoming through bottom, rear / side cable entry & outgoing through bus bar / cables (Rated Voltage:12 kV).
  • Technical Details
  • Model No : 11KV: MV V12 I.
  • Rated Voltage & Rated Current :12kV, 630A up to 2000A.
  • Frequency : 50Hz.
  • Short Time Withstand Current And Duration: 26.3kA/3Sec.
  • Insulation Level: 11kV : 28kV / 75kV Peak,33kV : 70kV / 170kV Peak.
  • Closing / Tripping Coil Voltage: 24VDC to 220VDC.
  • Spring Charge Mechanism: 230VAC.
  • Breaker Standard: IEC 62271 – 100, IS13318.
  • Degree of Protection: IP4X & 5X.
  • 11kV &33kV,630A to 1250A,13.1kA Porcelain Clad Vacuum Circuit Breaker

    Product overview: It is a highly sought product in the utilities distribution segment. The product is specially designed for outdoor application with rated voltage of 12 kV to 36 kV. Over the years, the product has undergone a frequent design improvement that brings you a sense of satisfaction over reliability & safety..
    Technical Details
  • Model No : 11KV: MV V12 I, 33kV : MV V36 I.
  • Rated Voltage & Rated Current :12kV & 36kV, 630A up to 2000A.
  • Frequency : 50Hz.
  • Short Time Withstand Current And Duration: 26.3kA/3Sec.
  • Insulation Level: 11kV : 28kV / 75kV Peak,33kV : 70kV / 170kV Peak.
  • Closing / Tripping Coil Voltage: 24VDC to 220VDC.
  • Spring Charge Mechanism: 230VAC.
  • Breaker Standard: IEC 62271 – 100, IS13318.
  • Degree of Protection: IP4X & 5X.
  • 11kV, 630A, 25kA Ring Main Gear (Both Indoor & Outdoor)

    Product overview:
    Ring Main Unit can also be provided with two number Load Break Switch with one number tee-off Vacuum Circuit Breaker with protective devices. It is highly flexible unit used in a wide range of applications including distribution switchboards, transformer substations, ring distribution networks and HV Connections to industrial & commercial sites. The units are developed to suit customer requirements for connection, supply, protection and sectionalizing with remote operation.
    Circuit Breaker:
    The CB comprises of 3 vacuum interrupters, which have a fault-make, fault-break rating. Earthing of the outgoing cable is achieved by the use of CB in series with the off-load disconnector / selector switch.
    Ring Switch:
    These are fault-make load break switches utilizing a single break 3 position switches viz., ‘ON’, ‘OFF’ & ‘Earth’ functions.
    Technical Details
  • Model No : 11KV: MV V12 I, 33kV : MV V36 I.
  • Rated Voltage & Rated Current :12kV & 36kV, 630A up to 2000A.
  • Frequency : 50Hz.
  • Short Time Withstand Current And Duration: 26.3kA/3Sec.
  • Insulation Level: 11kV : 28kV / 75kV Peak,33kV : 70kV / 170kV Peak.
  • Closing / Tripping Coil Voltage: 24VDC to 220VDC.
  • Spring Charge Mechanism: 230VAC.
  • Breaker Standard: IEC 62271 – 100, IS13318.
  • Degree of Protection: IP4X & 5X.
  • 11kV, 630A, 25kA Load Break Switch Panel (Both Indoor & Outdoor)

    Technical Details
  • Model No : MV V12 LBS.
  • Rated Voltage & Rated Current :12kV & 36kV, 630A up to 2000A.
  • Frequency : 50Hz.
  • Short Time Withstand Current And Duration: 26.3kA/3Sec.
  • Insulation Level: 28kV / 75kV Peak.
  • Breaker Standard: IEC 60265/ IS 9920.
  • Degree of Protection: IP4X & 5X.
  • 11kV, 630A, 25kA Off Load Isolator

    Technical Details

  • Model No : MV V12 OI.
  • Rated Voltage & Rated Current:12kV, 630A Up to 2000A.
  • Frequency : 50Hz.
  • Insulation Level: 28kV / 75kV Peak.
  • Breaker Standard: IS 9920.


  • Compact Substation

    Product overview: USS is a prefabricated secondary substation with the combination of minimum voltage & switchgear, low voltage switchgear, Distribution Transformer and associated components of metering and protection, all fitted in one compact unit in accordance to the standards.
    Technical Details
  • Model No : USS V12 O.
  • Rated Voltage & Rated Current:12kV, 630A Up to 2000A.
  • Frequency : 50Hz.
  • Insulation Level: 28kV / 75kV Peak.
  • IEC 62271-202, IEC 1330(1995) and IS 14786:2000 Standards.
  • Breaker Standard: IS 9920.
  • Low Voltage switchgear panels

    Low Voltage switchgear panels

    Product Range:
    LV panels, MCC, PCC, APFC, VFD, SOFTSTARTER Panels & All types of Distribution boards.
    Standards:
    IEC-60439 Part 1&2, IS-8623 Part 1&2 with Customized design.
    Fault level:
    UP TO 80kA with Al / Cu Bus bars.

    PCC panels

  • Ratings : From 630A to 6000A (Draw out / Fixed Type).
  • Construction : Single front, Single / Two Tier Arrangement.


  • MCC panels


  • Construction: Single / Double Front, Draw-out / Fixed Type with Microprocessor based along with VFD, Softstarters advanced motor protection relays.
  • For wide range of motor ratings.


  • APFC panels


    We manufacture Automatic Power Factor Control Panel to achieve unity/near unity power factor. The power factor controller of our APFC Panels monitors the reactive power which intern helps in saving energy.






    DB panels

    Distribution Board is highly appreciated among clients for its features like reliable performance, sturdy corrosion and durability.
    Features
  • Correction to Unit Power Factor
  • Modular design which allows easy handling by the user
  • Designed to minimize installation time & cost




  • VFD panels

    These products conform to the illustrated parameters of the industry. Our valued clients can avail this instrumentation panels in different technical specifications as per their requirement.
    Features
  • User-friendly operation
  • Minimum maintenance
  • Longer service life
  • Efficient performance


  • Soft Starters Panels

    In order to meet the diverse requirements of clients, we are offering a superior range of Soft Starter Panels. This range of soft starter panels is widely acclaimed among the clients for the following features.




    End Users

    Major Clients

  • Danway
  • Schneider Electric
  • ABB
  • OUR CUSTOMERS